rrTV-PHOTO   New HD TV
HOME   rrTV-PHOTO   GALLERIES   MY GALLERY   HELP-FAQ
myHOME PM pmRR MEMBERS 796 ONLINE 24 EVENTS SEARCH REGISTER  START HERE
 
1 page399 viewsPOST REPLY
Ron’s HeliProz South . Century Helicopter . MTA Hobbies

.
.
Main Discussion > T-REX 600 Nitro Super Pro Blades
 
 
knightman
Heliman
Location: Newport,South Wales,UK

Can anyone tell me if you can use 620mm blades on a T-REX 600 Nitro Super Pro for 3D.

thanks

Gareth

Watch out here I come!!!!
11-18-2008 09:16 PM
 
 
Rbush
Key Veteran
Location: The sheep factory, Wales

If memory serves, I think you can fit 690mm mains and 95mm tails on the 600N?

That was a silly place to put the ground !
11-20-2008 01:02 AM
 
 
2LTime
Veteran
Location: Walworth,NY

690??? hope that's a typo. 9 is right next to 0.

If you can't learn to do it well, learn to enjoy doing it badly.
11-20-2008 01:13 AM
 
 
Rbush
Key Veteran
Location: The sheep factory, Wales

No typo, I'm sure 690mm will fit a 600N.

That was a silly place to put the ground !
11-20-2008 01:19 AM
 
 
Rbush
Key Veteran
Location: The sheep factory, Wales

Why is it that 100 people have looked at this guys simple question and not given him the answer?

This must be one of the easiest questions for a 600N owner to answer.

This post has been here for two days. Within seconds of me giving a stupid answer, it's me that people reply to?

Why not reply to Knightmans easy question instead of picking me up ???

As far as I know, you can run 620's on a 600N, but they might hit the tails in a hard manover? I know the 600N is 8.5:1 (600mm gearing).

Maybe somebody out there will be good enough to give the 100% answer? I wouldn't hold your breath though

That was a silly place to put the ground !
11-20-2008 01:28 AM
 
 
OICU812
rrProfessor
Location: Grande Prairie, Alberta, Canada

You will turn blue, please do not hold to long. 620mm mains are acceptable for main blades with a max combo of 95mm tails on the 600N. If running 600mm mains you can put 105mm tails on however this is not needed as authority is there with 95mm tails in both cases, it has been recommended you run stiffer dampers of course with larger heavier blades to avoid any possibility of boom strikes as well,,,, be well.

...Once upon a time there were Nitros, flybars and frequency pins...
11-20-2008 01:40 AM
 
 
2LTime
Veteran
Location: Walworth,NY

I didn't know the "100%" answer, but I was sure 690 wasn't it.

If you can't learn to do it well, learn to enjoy doing it badly.
11-20-2008 01:45 AM
 
 
Jenny Tool
Heliman
Location: Zimbabwe

Knightman ( Mr Shelf Queen)you should be using 710"s on your 600n as this will make it look like the absolute dogs danglies sitting on that shelf,plus 710"s are easier to rid of dust compared to 620"s,hope this helps.

Never tell a women how much money you have!
11-20-2008 02:22 PM
 
 
nmrs
Senior Heliman
Location: Austin, TX

Quote 
Knightman ( Mr Shelf Queen)you should be using 710"s on your 600n as this will make it look like the absolute dogs danglies sitting on that shelf,plus 710"s are easier to rid of dust compared to 620"s,hope this helps.

Wow, if this was a saloon Knightman, I'd say Jenny Tool just called you out...

450 se v2
11-20-2008 04:10 PM
 
 
JetFire
Key Veteran
Location: The Golden STATE

Quote 
Can anyone tell me if you can use 620mm blades on a T-REX 600

Yes. Fits the 600N and or 600E whether its the Pro, Super Pro, Super duper pro etc etc.


Trex600N Pro
Kinetic 50
Futaba 7C2.4

-The ONLY way you fail is when you quit.-
11-20-2008 05:50 PM
 
 
knightman
Heliman
Location: Newport,South Wales,UK

Thanks all for your input especially jenny tools comments.
If I use 620 should I changed the gear ratio.

Watch out here I come!!!!
11-20-2008 10:21 PM
 
 
1 page399 viewsPOST REPLY
Model Rectifier Corp . PowerHelis . Heli Wholesaler

.
.
Main Discussion > T-REX 600 Nitro Super Pro Blades
 PRINT TOPIC Advertisers 

Subscribe to This Topic

Wednesday, January 7 - 10:44 pm - Copyright © 2000 - 2009 runryder.com | email | link to rr | runryder needs cookie